

LED beacon 12V-24V IP68 ECE (4 settings, yellow, without magnet, 1.4 m cable, without plug) COD:3RWLB37401Y
Manufacturer: HORPOL
Lamp model: HOR 86
Manufacturer code: LDO 2274
Light source: 48xLED
Voltage: 12-24V
Power: max. 17W
Diffuser: yellow
Light: yellow
Number of programs: 4
Synchronization: YES
Material: PC
Weight: 0.5kg
Lamp dimensions: height 94mm by.119mm
Wire: 2×0.75mm2; 1.4m
Degree of protection: IP68
Operating temperature range: -40°C ~ +50°C
Approval: ECE E9 R65
1 year manufacturer's warranty
Country of production: Poland
Note:
Synchronizer - an additional device that allows you to connect more than one lamp in such a way that all lamps are turned on in the same mode, in phase or counterfeit.
In case the sybischanger is not connected, the blue wire can be used to change the lighting modes, then it should be shorted to ground. If the blue wire is not used, please insulate and secure it carefully. against accidental short circuit with other cables.
Lamps mounted with screws can only be screwed onto flat surfaces.
Lamp model: HOR 86
Manufacturer code: LDO 2274
Light source: 48xLED
Voltage: 12-24V
Power: max. 17W
Diffuser: yellow
Light: yellow
Number of programs: 4
Synchronization: YES
Material: PC
Weight: 0.5kg
Lamp dimensions: height 94mm by.119mm
Wire: 2×0.75mm2; 1.4m
Degree of protection: IP68
Operating temperature range: -40°C ~ +50°C
Approval: ECE E9 R65
1 year manufacturer's warranty
Country of production: Poland
Note:
Synchronizer - an additional device that allows you to connect more than one lamp in such a way that all lamps are turned on in the same mode, in phase or counterfeit.
In case the sybischanger is not connected, the blue wire can be used to change the lighting modes, then it should be shorted to ground. If the blue wire is not used, please insulate and secure it carefully. against accidental short circuit with other cables.
Lamps mounted with screws can only be screwed onto flat surfaces.
Choose options
